Three parts working together
Every vehicle tracking system has three pieces: the device in your car, a server that receives its reports, and the app on your phone. The device works out where it is using satellites, sends that information over the mobile network, and the app turns it into a map, alerts and trip history you can read at a glance.
What can affect a report
Most of the time you won't notice any delay. But a few things can hold up a fresh position: deep basements and covered parking that block satellite signals, areas with weak mobile coverage, or the car's battery being disconnected. That's why our app always shows the time of the last report, so you know how fresh the information is.
Step 1: the device works out its position
The tracker receives signals from GPS satellites and calculates its latitude and longitude. In open areas this is usually accurate to a few metres. Tall buildings, tunnels and covered parking can reduce accuracy or block signals temporarily.
Step 2: the position is sent over the mobile network
A SIM inside the device sends the position, speed, ignition status and time to the tracking server over the mobile data network. Where signal is weak, the device can store reports and send them when coverage returns, depending on the model.
Step 3: the app shows you the information
The server processes the reports and shows them in your app and web dashboard: the latest position, trip history, alerts and reports. Alerts such as ignition on or leaving a geo-fence are triggered from the reports the device sends.
Why timestamps matter
If the car is in a basement or the device has lost power, the map may show the last known position. The time beside the pin tells you whether you are looking at a live report or an older one. Always check it before acting on a location.
Where alerts come from
Alerts are rules that run on the tracking server. When a report arrives showing that the ignition is on, the car has crossed a geo-fence or the speed is over your limit, the server sends a notification to your app. That's why alerts depend on the same things as location: a powered device and a working network connection.
Engine control explained
Some trackers can be connected so that a parked vehicle cannot be restarted. The command is sent from the platform to the device, which then blocks the starting circuit. It's designed for a stationary vehicle and is used through an agreed procedure with the control room. It is never used to stop a car while it's moving.
What the control room does
The control room is a team that can see your vehicle on the tracking platform and help you in an emergency. If you suspect theft, call them and the police straight away. They can share the latest location and trip information to help.